Axiom SSDEP65IC1T9‑AX – 1.92TB 2.5″ SAS 24Gb/s SSD

Axiom SSDEP65IC1T9‑AX 1.92TB 2.5″ SAS 24Gb/s SSD

Overview

The Axiom SSDEP65IC1T9‑AX is a 2.5‑inch hot‑swappable enterprise SAS (Serial Attached SCSI) solid state drive designed for high‑throughput, low‑latency block storage in data center and server environments. It is intended for storage architects, server infrastructure engineers, and system integrators deploying high‑capacity SAS SSDs where dual‑port redundancy and sustained I/O performance are required. This model addresses mixed workload patterns in virtualization hosts, SAN/NAS arrays, and clustered storage nodes.

This SSD employs a 24 Gb/s SAS interface with full‑duplex dual‑port architecture to enable redundant access from SAS controllers and backplanes, essential for high‑availability storage designs. It delivers sustained sequential read performance up to approximately 4,200 MB/s and sustained sequential write throughput up to about 2,400 MB/s, supported by robust random I/O to handle enterprise workloads.

Physically, SSDEP65IC1T9‑AX conforms to the industry‑standard 2.5‑inch form factor with hot‑swap capability, permitting replacement without powering down host systems. Endurance is rated at approximately one drive write per day over a typical five‑year service life, with a total bytes written (TBW) rating of about 3,504 TB and enterprise‑class error correction.

This drive is suitable for deployment in enterprise server storage tiers such as VM datastores, high‑performance databases, and mixed‑access SAN/NAS nodes where consistent throughput and dual‑path redundancy are critical.

It is not appropriate for consumer or desktop systems, nor for infrastructures limited to SATA or SAS 12 Gb/s interfaces, as full 24 Gb/s dual‑port SAS performance cannot be realized without compatible enterprise backplanes and controllers.

Technical Specifications