Axiom SSDEP65DV1T9-AX 1.92TB SAS 24Gb/s SSD

Axiom SSDEP65DV1T9-AX 1.92TB SAS 24Gb/s SSD

Overview

The Axiom SSDEP65DV1T9-AX is a 2.5-inch enterprise SAS solid state drive designed for data center storage environments requiring high availability, predictable latency, and dual-path redundancy. It is deployed by infrastructure engineers in rack servers, blade systems, and SAN-attached platforms where SAS backplanes ensure continuous data access and failover capability. The drive is used to support virtualization clusters, transactional databases, and mixed enterprise workloads operating under sustained I/O demand.

This model operates on a 24 Gb/s SAS interface with dual-port full-duplex capability, enabling simultaneous multi-path communication across RAID controllers and SAS expanders. It delivers sequential read performance up to approximately 4.10 GB/s and sequential write throughput around 2.34 GB/s, with random I/O performance reaching up to 420K read IOPS and 95K write IOPS, supporting high concurrency and consistent throughput.

The drive follows a 2.5-inch hot-swappable form factor, allowing installation into enterprise server drive bays and storage enclosures without downtime. Dual-port SAS architecture supports active-active controller configurations, improving system resilience and enabling load balancing across redundant storage paths.

It is positioned within mid-capacity enterprise SSD tiers, supporting virtualization hosts, database systems, and distributed storage environments where stable performance is required over long operational cycles. The 1.92 TB capacity provides balanced storage density for RAID configurations and software-defined storage nodes.

In deployment, this SSD is typically installed in RAID arrays or hyperconverged storage clusters where dual-path access enhances uptime and operational continuity. It is also used for read-intensive and mixed workloads, with endurance rated at approximately 1 DWPD over 5 years (~3,504 TBW), aligning with enterprise lifecycle expectations.

This device is not suitable for SATA-only systems, desktop environments, or infrastructures lacking SAS controllers. It requires a SAS backplane supporting 24 Gb/s speeds to fully utilize its throughput and redundancy capabilities.

Technical Specifications